Victorio VKP1024 Instruction Manual download pdf (Page 9)

Use Instructions

DO NOT turn the handle if the Grain Mill is empty. This will

damage the milling heads.

Now that you have assembled your Grain Mill properly, read through

ALL of the following instructions before you start the grinding

process.

The rst time you use the Grain Mill be sure to dispose of the rst

2-3 cups of grain which has been ground as it may contain metal

residue from the manufacturing process.

1. Before you put grain into the hopper,

select the desired coarseness you

want your our to be by turning the

adjustment knob, clockwise for ne and

counter-clockwise for coarse (see diagram

at right).

2. Never use tools to tighten the

adjustment knob, as it will damage

the mill.

3. For best results, adjust the knob clockwise to the nest setting, just

until the knob is snug, then turn the knob counter-clockwise 1/4 turn

to prevent over tightening and possible damage to the milling cone.

As you grind, you can adjust the knob counter-clockwise, for a coarser

textures, if that is what is desired.

4. Once you have your adjustment knob set, pour grain into the hopper.

The Grain Mill holds 4-1/2 cups of grain, which yields approximately 7

cups of ne our, depending on the grain.

5. Turn the handle clockwise to begin grinding.

6. *TIP - If the grain mill is grinding too coarse, you can adjust it to be

ner by turning the handle counter-clockwise 2-3 full rotations while

tightening the adjustment knob towards the ne setting.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Victorio VKP1024 Instruction Manual Page 9